Chapter 2 › 2.2 Level Surfaces › 2.2 Level Surfaces
Section

2.2  Level Surfaces

Many surfaces are defined using an equation such as \(x^2+y^2+z^2=1\), or \(x^2+y^2=z^2+1\). They are level sets of a function \(g(x,y,z)\). In this section, we are going to prove a theorem that allows us to show easily that some level sets \(g^{-1}(c)\) are regular surfaces.

Theorem 2.7

Let \(g(x,y,z):\R^3\to\R\) be a smooth function of three variables. Consider a non-empty level set \(g^{-1}(c)\) where \(c\) is a constant. If \(\grad g(x_0,y_0,z_0)\neq\mathbf{0}\) at all points \((x_0,y_0,z_0)\in g^{-1}(c)\), then the level set \(g^{-1}(c)\) is a regular surface.

Proof — revealed step by step

The key idea of the proof is to use the Implicit Function Theorem. Given any point \(p=(x_0,y_0,z_0)\in g^{-1}(c)\), since \(\grad g(x_0,y_0,z_0)\neq(0,0,0)\), at least one of the first partials \(\pd{g}{x}(p),\ \pd{g}{y}(p),\ \pd{g}{z}(p)\) is non-zero. Without loss of generality, assume \(\pd{g}{z}(p)\neq 0\), then the Implicit Function Theorem shows that locally around the point \(p\), the level set \(g^{-1}(c)\) can be regarded as a graph \(z=f(x,y)\) of some smooth function \(f\) of \((x,y)\). To be precise, there exists an open set \(O\) of \(g^{-1}(c)\) containing \(p\) such that there is a smooth function \(f(x,y):U\subset\R^2\to\R\) from an open set \(U\) such that \((x,y,f(x,y))\in O\subset g^{-1}(c)\) for any \((x,y)\in U\). As such, the smooth local parametrization \(\bF:U\to O\) defined by \(\bF(u,v)=(u,v,f(u,v))\) is a smooth local parametrization of \(g^{-1}(c)\).

In the case where \(\pd{g}{y}(p)\neq 0\), the above argument is similar as locally around \(p\) one can regard \(g^{-1}(c)\) as a graph \(y=h(x,z)\) for some smooth function \(h\). Similar in the case \(\pd{g}{x}(p)\neq 0\).

Since every point \(p\) can be covered by the image of a smooth local parametrization, the level set \(g^{-1}(c)\) is a regular surface. \(\square\)

Example 2.8

The unit sphere \(x^2+y^2+z^2=1\) is a level surface \(g^{-1}(1)\) where \(g(x,y,z):=x^2+y^2+z^2\). The gradient vector \(\grad g=(2x,2y,2z)\) is zero only when \((x,y,z)=(0,0,0)\). Since the origin is not on the unit sphere, we have \(\grad g(x_0,y_0,z_0)\neq(0,0,0)\) for any \((x_0,y_0,z_0)\in g^{-1}(1)\). Therefore, the unit sphere is a regular surface.

Similarly, one can also check that the surface \(x^2+y^2=z^2+1\) is a regular surface. It is a level set \(h^{-1}(1)\) where \(h(x,y,z)=x^2+y^2-z^2\). Since \(\grad h=(2x,2y,-2z)\), the origin is the only point \(p\) at which \(\grad h(p)=(0,0,0)\) and it is not on the level set \(h^{-1}(1)\). Therefore, \(h^{-1}(1)\) is a regular surface. \(\square\)

Checkpoint
In Example 2.8, \(g(x,y,z)=x^2+y^2+z^2\) and \(\grad g=(2x,2y,2z)\) vanishes only at the origin. Why does Theorem 2.7 still apply to the unit sphere \(g^{-1}(1)\)?
WhyTheorem 2.7 only needs \(\grad g\neq\mathbf 0\) at points of the level set. The single bad point (the origin) has \(g=0\neq 1\), so it is not on \(g^{-1}(1)\); hence the gradient is non-zero everywhere on the sphere.

However, the cone \(x^2+y^2=z^2\) cannot be shown to be a regular surface using Theorem 2.7. It is a level surface \(h^{-1}(0)\) where \(h(x,y,z):=x^2+y^2-z^2\). The origin \((0,0,0)\) is on the cone and \(\grad h(0,0,0)=(0,0,0)\). Theorem 2.7 fails to give any conclusion.

The converse of Theorem 2.7 is not true. Consider \(g(x,y,z)=z^2\), then \(g^{-1}(0)\) is the \(xy\)-plane which is clearly a regular surface. However, \(\grad g=(0,0,2z)\) is zero at the origin which is contained in the \(xy\)-plane.

Checkpoint
Why does Theorem 2.7 fail to conclude that the cone \(x^2+y^2=z^2\) is a regular surface?
WhyWriting the cone as \(h^{-1}(0)\) with \(h=x^2+y^2-z^2\), we have \(\grad h=(2x,2y,-2z)\), which vanishes at the origin — and the origin is a point of the cone. The hypothesis \(\grad h\neq\mathbf{0}\) on the level set fails there, so the theorem gives no conclusion. (This is why the theorem is only a sufficient condition.)
Checkpoint
The example \(g(x,y,z)=z^2\), \(g^{-1}(0)=\) the \(xy\)-plane, is given to show that:
WhyThe \(xy\)-plane is a regular surface, yet \(\grad g=(0,0,2z)\) vanishes at the origin which lies on \(g^{-1}(0)\). So the gradient condition is sufficient but not necessary — the converse of the theorem does not hold.
Exercise 2.9  [dC76, P.66]

Let \(f(x,y,z)=(x+y+z-1)^2\). For what values of \(c\) is the set \(f^{-1}(c)\) a regular surface?

Need help?
Exercise 2.10

A torus is defined by the equation \(z^2=R^2-\big(\sqrt{x^2+y^2}-r\big)^2\) where \(R>r>0\) are constants. Show that it is a regular surface.

Need help?

The proof of Theorem 2.7 makes use of the Implicit Function Theorem which is an existence result. It shows a certain level set is a regular surface, but it fails to give an explicit smooth local parametrization around each point.

There is one practical use of Theorem 2.7 though. Suppose we are given \(\bF(u,v)\) which satisfies conditions (1) and (3) in Definition 2.1 and that \(\bF\) is continuous and \(\bF^{-1}\) exists. In order to verify that it is a smooth local parametrization, we need to prove continuity of \(\bF^{-1}\), which is sometimes difficult. Here is one example:

\[\bF(u,v)=(\sin u\cos v,\ \sin u\sin v,\ \cos u),\quad 0

is a smooth local parametrization of a unit sphere. It is clearly a smooth map from \((0,\pi)\times(0,2\pi)\subset\R^2\) to \(\R^3\), and it is quite straightforward to verify condition (3) in Definition 2.1 and that \(\bF\) is one-to-one. However, it is rather difficult to write down an explicit \(\bF^{-1}\), let alone to show it is continuous.

The following result tells us that if the surface is given by a level set satisfying conditions stated in Theorem 2.7, and \(\bF\) satisfies conditions (1) and (3), then \(\bF^{-1}\) is automatically continuous. Precisely, we have the following:

Proposition 2.9

Assume all given conditions stated in Theorem 2.7. Furthermore, suppose \(\bF(u,v)\) is a bijective map from an open set \(U\subset\R^2\) to an open set \(O\subset M:=g^{-1}(c)\) which satisfies conditions (1) and (3) in Definition 2.1. Then, \(\bF\) satisfies condition (2) as well and hence is a smooth local parametrization of \(g^{-1}(c)\).

Proof — revealed step by step

Given any point \(p\in g^{-1}(c)\), we can assume without loss of generality that \(\pd{g}{z}(p)\neq 0\). Recall from Multivariable Calculus that \(\grad g(p)\) is a normal vector to the level surface \(g^{-1}(c)\) at point \(p\). Furthermore, if \(\bF(u,v)\) is a map satisfying conditions (1) and (3) of Definition 2.1, then \(\pdF{u}(p)\times\pdF{v}(p)\) is also a normal vector to \(g^{-1}(c)\) at \(p\).

Now that the \(\hat{\mathbf{k}}\)-component of \(\grad g(p)\) is non-zero since \(\pd{g}{z}(p)\neq 0\), so the \(\hat{\mathbf{k}}\)-component of the cross product \(\pdF{u}(p)\times\pdF{v}(p)\) is also non-zero. If we express \(\bF(u,v)\) as \(\bF(u,v)=(x(u,v),y(u,v),z(u,v))\), then the \(\hat{\mathbf{k}}\)-component of \(\pdF{u}(p)\times\pdF{v}(p)\) is given by \[\left(\pd{x}{u}\pd{y}{v}-\pd{y}{u}\pd{x}{v}\right)(p)=\begin{vmatrix}\pd{x}{u}&\pd{x}{v}\\[2pt]\pd{y}{u}&\pd{y}{v}\end{vmatrix}(p).\]

Define \(\pi:\R^3\to\R^2\) by \(\pi(x,y,z)=(x,y)\). The above shows that the composition \(\pi\circ\bF\) given by \((\pi\circ\bF)(u,v)=(x(u,v),y(u,v))\) has non-zero Jacobian determinant at \(p\). By the Inverse Function Theorem, \(\pi\circ\bF\) has a smooth local inverse near \(p\). In particular, \((\pi\circ\bF)^{-1}\) is continuous near \(p\).

Finally, by the fact that \((\pi\circ\bF)\circ\bF^{-1}=\pi\) and that \((\pi\circ\bF)^{-1}\) exists and is continuous locally around \(p\), we can argue that \(\bF^{-1}=(\pi\circ\bF)^{-1}\circ\pi\) is also continuous near \(p\). This completes the proof. \(\square\)

Exercise 2.11

Rewrite the proof of Proposition 2.9 by assuming \(\pd{g}{y}(p)\neq 0\) instead.

Need help?
Example 2.10

We have already shown that the unit sphere \(x^2+y^2+z^2=1\) is a regular surface using Theorem 2.7 by regarding it as the level set \(g^{-1}(1)\) where \(g(x,y,z)=x^2+y^2+z^2\). We also discussed that \(\bF(u,v)=(\sin u\cos v,\sin u\sin v,\cos u)\), \(0

Condition (2) is not easy to verify because it is difficult to write down the inverse map \(\bF^{-1}\) explicitly. However, thanks to Proposition 2.9, \(\bF\) is a smooth local parametrization since it satisfies conditions (1) and (3), and it is one-to-one. \(\square\)

Checkpoint
On a level surface satisfying Theorem 2.7, what work does Proposition 2.9 save you when checking that a candidate \(\bF\) is a smooth local parametrization?
WhyCondition (2) requires \(\bF^{-1}\) to be continuous, which is often hard to verify directly. Proposition 2.9 says that on a level surface from Theorem 2.7, if \(\bF\) is a bijection satisfying (1) and (3), then (2) holds automatically. So you only need (1), (3), and that \(\bF\) is one-to-one.
Exercise 2.12

Consider the Mercator projection of the unit sphere \[\bF(u,v)=\left(\frac{\cos v}{\cosh u},\ \frac{\sin v}{\cosh u},\ \frac{\sinh u}{\cosh u}\right)\] where \(\sinh u:=\tfrac12(e^u-e^{-u})\) and \(\cosh u:=\tfrac12(e^u+e^{-u})\).

  1. What are the domain and range of \(\bF\)?
  2. Show that \(\bF\) is a smooth local parametrization.
Need help?
Exercise 2.13

Consider the following parametrization of a torus \(T^2\): \[\bF(u,v)=((r\cos u+R)\cos v,\ (r\cos u+R)\sin v,\ r\sin u)\] where \((u,v)\in(0,2\pi)\times(0,2\pi)\), and \(R>r>0\) are constants. Show that \(\bF\) is a smooth local parametrization.

Need help?