Chapter 1 › 1.1 Curvature and Torsion › 1.1.2 Arc-Length Parametrization
Subsection

1.1.2  Arc-Length Parametrization

One important concept that leads to the definition of curvature is the arc-length reparametrization of a given regular curve. We hope to reparametrize a curve \(\gamma(t)\) by \(\tilde{\gamma}(s) := \gamma(\varphi(s))\) for some function \(\varphi\) such that \(\tilde{\gamma}(s)\) has unit speed. Here the variable \(s\) is used, and it is a convention of using \(s\) as the variable when the curve has unit speed.

We now discuss how to find such a reparametrization. Suppose the curve \(\gamma(t)\) starts at \(t = t_0\). Then the following quantity: \[\psi(t) := \int_{t_0}^{t} |\gamma'(\tau)|\, d\tau\] measures the distance travelled by the particle after \(t\) units of time since its initial time. The Fundamental Theorem of Calculus shows \[\frac{d}{dt}\psi(t) = \frac{d}{dt}\int_{t_0}^{t} |\gamma'(\tau)|\, d\tau = |\gamma'(t)| \gt 0,\] where we used the assumption that \(\gamma(t)\) is a regular curve so that \(\gamma'(t) \neq 0\) for all \(t\). This shows \(\psi(t)\) is a strictly increasing function, and so \(\psi^{-1}\) exists. Furthermore, \(\psi\) is \(\Cinf\) thanks to the fact that \(|\gamma'(t)| \neq 0\). This shows \(\psi^{-1}\) is also \(\Cinf\).

Then, we let \(\tilde{\gamma}(s) := \gamma(\psi^{-1}(s))\), and verify that this reparametrization would have unit speed. By the chain rule, we have \[\frac{d}{ds}\tilde{\gamma}(s) = \frac{d}{dt}\gamma(\psi^{-1}(s)) = \gamma'(\psi^{-1}(s))\frac{d}{ds}\psi^{-1}(s) = \gamma'(\psi^{-1}(s)) \cdot \frac{1}{\psi'(\psi^{-1}(s))} = \frac{\gamma'(\psi^{-1}(s))}{|\gamma'(\psi^{-1}(s))|}.\] The last step follows from \(\frac{d}{dt}\psi(t) = |\gamma'(t)|\). It is then clear that \[\left|\frac{d}{ds}\tilde{\gamma}(s)\right| = 1.\] Based on the above discussion, we have proved:

Theorem 1.3

Given any regular curve \(\gamma(t) : I \to \R^n\), one can always reparametrize it by arc-length. Precisely, let \(t_0 \in I\) be a fixed number and consider the following function of \(t\): \[f(t) := \int_{t_0}^{t} |\gamma'(\tau)|\, d\tau.\] Then, \(f\) has a \(\Cinf\) inverse \(f^{-1}\), and the reparametrized curve \(\tilde{\gamma}(s) := \gamma(f^{-1}(s))\) is a regular curve such that \(\left|\frac{d}{ds}\tilde{\gamma}(s)\right| = 1\) for any \(s\). The reparametrized curve \(\tilde{\gamma}(s)\) is called an arc-length parametrization of the curve.

Checkpoint
According to Theorem 1.3, what is the key property of the arc-length function \(f(t)=\int_{t_0}^{t}|\gamma'(\tau)|\,d\tau\) that makes reparametrization possible?
WhySince \(\gamma\) is regular, \(|\gamma'(t)|>0\) everywhere, so \(f'(t)=|\gamma'(t)|>0\). A strictly increasing \(\Cinf\) function has a \(\Cinf\) inverse \(f^{-1}\), enabling the reparametrization \(\tilde{\gamma}(s)=\gamma(f^{-1}(s))\) with unit speed.

Let's look at one example. Given a curve \(\gamma(t) = (\cos(e^t - 1), \sin(e^t - 1))\), we have \[\gamma'(t) = (-e^t \sin(e^t - 1),\, e^t \cos(e^t - 1)),\quad |\gamma'(t)| = e^t \neq 0\] for any \(t \in (-\infty, \infty)\). Therefore, \(\gamma(t)\) is a regular curve. By an easy computation, one can show \[\psi(t) = \int_0^t |\gamma'(\tau)|\, d\tau = \int_0^t e^\tau\, d\tau = e^t - 1,\] and so \(\psi^{-1}(s) = \log(s+1)\). The arc-length reparametrization is then given by \[\tilde{\gamma}(s) = \gamma(\psi^{-1}(s)) = \gamma(\log(s+1)) = \bigl(\cos(e^{\log(s+1)}-1),\, \sin(e^{\log(s+1)}-1)\bigr) = (\cos s,\, \sin s).\] The curve \(\tilde{\gamma}(s)\) clearly has unit speed.

However, if we attempt to find a reparametrization on a non-regular curve say \(\gamma(t) = (\cos(t^2), \sin(t^2))\), in a similar way as the above, we can see that such a reparametrization obtained will not be smooth. To see this, we first compute \[\psi(t) = \int_0^t |\gamma'(\tau)|\, d\tau = \int_0^t 2|\tau|\, d\tau = \begin{cases} t^2 & \text{if } t \ge 0; \\ -t^2 & \text{if } t \lt 0. \end{cases}\] Its inverse is given by: \[\psi^{-1}(s) = \begin{cases} \sqrt{s} & \text{if } s \ge 0; \\ -\sqrt{-s} & \text{if } s \lt 0. \end{cases}\] Then, the arc-length reparametrization is given by: \[\tilde{\gamma}(s) := \gamma(\psi^{-1}(s)) = \begin{cases} (\cos(s),\, \sin(s)) & \text{if } s \ge 0 \\ (\cos(-s),\, \sin(-s)) & \text{if } s \lt 0 \end{cases}\] or in short, \(\tilde{\gamma}(s) = (\cos(s), \sin|s|)\), which is not differentiable at \(s = 0\). That is one of the reasons why we want to restrict our curves to be regular, so that \(\gamma'(t)\) is non-vanishing and we can always reparametrize it by arc-length (theoretically speaking).

Another reason why we require the \(\gamma'(t) \neq 0\) condition is that we want to rule out some “bad”, or “singular” curves which we do not want to call regular. One example is \[\gamma(t) = \begin{cases} (0,\, -e^{-1/t^2}) & \text{if } t \lt 0 \\ (0,\, 0) & \text{if } t = 0 \\ (e^{-1/t^2},\, 0) & \text{if } t \gt 0 \end{cases}.\] It is a well-known fact (and Calculus 1 exercise) that the function \[f(t) = \begin{cases} e^{-1/t^2} & \text{if } t \gt 0 \\ 0 & \text{if } t \le 0 \end{cases}\] is \(\Cinf\) on \(\R\), and \(f^{(n)}(0) = 0\) for any \(n \in \N\). Therefore, \(\gamma(t)\) is a \(\Cinf\) curve, but it is not regular since \(\gamma'(0) = (0,0)\). If we sketch the trajectory of \(\gamma\), the particle travels upward along the negative \(y\)-axis first, then after arriving at \((0,0)\), it makes a turn at \(\frac{\pi}{2}\) and continues the path on the positive \(x\)-axis. The trajectory is certainly not “smooth” at the origin, but nonetheless \(\gamma(t)\) is a \(\Cinf\) curve.

This example shows why we require the condition \(\gamma'(t) \neq 0\) when defining regular curves, so that the above pathological example could be ruled out.

Exercise 1.1

Determine whether each of the following is a regular curve. If so, reparametrize the curve by arc-length:

  1. \(\gamma(t) = (\cos t, \sin t, t)\), \(t \in (-\infty, \infty)\)
  2. \(\gamma(t) = (t - \sin t,\, 1 - \cos t)\), \(t \in (-\infty, \infty)\)
Need help?
Exercise 1.2

Find a \(\Cinf\) parametrization \(\gamma(t)\) of the closed semi-circle, so that its trajectory is given by \[\{(x, y) \in \R^2 : x^2 + y^2 = 1,\; y \gt 0\} \cup ([-1,1] \times \{0\}).\]

Need help?