Chapter 1 › 1.1 Curvature and Torsion › 1.1.4 Curvature Formula
Subsection

1.1.4  Curvature Formula

Although the curvature is defined as \(\kappa(s) = |\gamma''(s)|\) where \(\gamma(s)\) is an arc-length parametrization of the curve, it is very often impractical to compute the curvature this way. The main reason is that the arc-length parametrizations of many paths are very difficult to find explicitly. A “notorious” example is the ellipse: \[\gamma(t) = (a\cos t,\, b\sin t)\] where \(a\) and \(b\) are positive constants with \(a \neq b\). The arc-length function is given by: \[\psi(t) = \int_0^t \sqrt{a^2 \sin^2\tau + b^2 \cos^2\tau}\, d\tau.\] While it is very easy to compute the integral when \(a = b\), there is no closed form or explicit anti-derivative for the integrand if \(a \neq b\). Although the arc-length parametrization exists theoretically speaking (Theorem 1.3), it cannot be written down explicitly and so the curvature cannot be computed from the definition.

The purpose of this section is to derive a formula for computing curvature without the need of finding its arc-length parametrization. To begin, we first prove the following important observation:

Lemma 1.7

Let \(\gamma(s) : I \to \R^n\) be a curve parametrized by arc-length, then the velocity \(\gamma'(s)\) and the acceleration \(\gamma''(s)\) are always orthogonal for any \(s \in I\).

Checkpoint
For an arc-length parametrized curve, Lemma 1.7 states \(\gamma'(s)\perp\gamma''(s)\). Which one-line argument proves this?
WhySince \(\gamma\) is arc-length parametrized, \(|\gamma'(s)|^2=1\). Differentiating both sides: \(2\,\gamma'(s)\cdot\gamma''(s)=0\), so \(\gamma'\perp\gamma''\). This orthogonality is what makes \(\mathbf{N}\) in Definition 1.12 perpendicular to \(\mathbf{T}\).
Proof — revealed step by step

Since \(\gamma(s)\) is parametrized by arc-length, we have \(|\gamma'(s)| = 1\) for any \(s\), and so: \[\frac{d}{ds}|\gamma'(s)|^2 = \frac{d}{ds}1 = 0.\]

Expanding the left side: \[\frac{d}{ds}(\gamma'(s) \cdot \gamma'(s)) = 0\] \[\gamma''(s) \cdot \gamma'(s) + \gamma'(s) \cdot \gamma''(s) = 0\] \[2\gamma''(s) \cdot \gamma'(s) = 0\] \[\gamma''(s) \cdot \gamma'(s) = 0.\] Therefore, \(\gamma'(s)\) is orthogonal to \(\gamma''(s)\) for any \(s\).

Proposition 1.8

Given any regular curve \(\gamma(t)\) in \(\R^3\), the curvature as a function of \(t\) can be computed by the following formula: \[\kappa(t) = \frac{|\gamma'(t) \times \gamma''(t)|}{|\gamma'(t)|^3}.\]

Checkpoint
The formula \(\kappa(t)=|\gamma'(t)\times\gamma''(t)|\,/\,|\gamma'(t)|^3\) in Proposition 1.8 is useful because:
WhyFinding an explicit arc-length reparametrization is often difficult. Proposition 1.8 bypasses this by expressing \(\kappa\) directly in terms of \(\gamma'\) and \(\gamma''\) for any regular parametrization in \(\R^3\), as illustrated in Example 1.10.
Proof — revealed step by step

Since \(\gamma(t)\) is a regular curve, there exists an arc-length parametrization \(\tilde{\gamma}(s) = \gamma(\psi^{-1}(s))\), where \(\psi(t) = \int_{t_0}^t |\gamma'(\tau)|\, d\tau\). For simplicity, we denote \(\gamma(\psi^{-1}(s))\) by \(\gamma(s)\) — we will use this abuse of notation from now on. Recall that \(s\) and \(t\) are related by \(s = \psi(t)\), so \(\frac{ds}{dt} = |\gamma'(t)|\).

By the chain rule, we have: \[(1.1)\quad \frac{d\gamma}{dt} = \frac{d\gamma}{ds}\frac{ds}{dt} = \gamma'(s)\frac{ds}{dt}\] \[(1.2)\quad \frac{d^2\gamma}{dt^2} = \frac{d}{dt}\left(\gamma'(s)\frac{ds}{dt}\right) = \frac{d\gamma'(s)}{dt}\frac{ds}{dt} + \gamma'(s)\frac{d^2s}{dt^2}.\] By the chain rule again, \(\frac{d\gamma'(s)}{dt} = \gamma''(s)\frac{ds}{dt}\). Substituting back: \[(1.3)\quad \frac{d^2\gamma}{dt^2} = \gamma''(s)\left(\frac{ds}{dt}\right)^2 + \gamma'(s)\frac{d^2s}{dt^2}.\]

Taking the cross product of (1.1) and (1.3): \[(1.4)\quad \frac{d\gamma}{dt} \times \frac{d^2\gamma}{dt^2} = \left(\frac{ds}{dt}\right)^3 \gamma'(s) \times \gamma''(s) + \frac{d^2s}{dt^2}\frac{ds}{dt}\,\underbrace{\gamma'(s) \times \gamma'(s)}_{=0} = \left(\frac{ds}{dt}\right)^3 \gamma'(s) \times \gamma''(s).\]

Since \(\gamma'(s)\) and \(\gamma''(s)\) are orthogonal by Lemma 1.7, we have \(|\gamma'(s) \times \gamma''(s)| = |\gamma'(s)||\gamma''(s)| = \kappa(s)\). Taking magnitudes in (1.4): \[\left|\frac{d\gamma}{dt} \times \frac{d^2\gamma}{dt^2}\right| = \kappa\left|\frac{ds}{dt}\right|^3.\] Therefore \(\kappa = \frac{|\gamma'(t) \times \gamma''(t)|}{|ds/dt|^3}\). The proof is completed by \(\frac{ds}{dt} = |\gamma'(t)|\).

Remark 1.9

Since the cross product is involved, Proposition 1.8 can only be used for curves in \(\R^2\) or \(\R^3\). To apply the result for curves in \(\R^2\), say \(\gamma(t) = (x(t), y(t))\), one may regard it as the curve \(\gamma(t) = (x(t), y(t), 0)\) in \(\R^3\).

Checkpoint
Remark 1.9 explains how to apply the formula of Proposition 1.8 to a plane curve \(\gamma(t)=(x(t),y(t))\). What adjustment is needed?
WhyThe cross product \(\gamma'\times\gamma''\) requires vectors in \(\R^3\). By appending a zero third component, a plane curve becomes a \(\R^3\) curve and Proposition 1.8 applies directly, as noted in Remark 1.9.
Example 1.10

Let \(\gamma(t) = (a\cos t, b\sin t, 0)\) be a parametrization of an ellipse on the \(xy\)-plane where \(a\) and \(b\) are positive constants, then we have: \[\gamma'(t) = (-a\sin t,\, b\cos t,\, 0)\] \[\gamma''(t) = (-a\cos t,\, -b\sin t,\, 0)\] \[\gamma'(t) \times \gamma''(t) = (ab\sin^2 t + ab\cos^2 t)\,\hat{k} = ab\,\hat{k}.\] Therefore, by Proposition 1.8, its curvature function is given by: \[\kappa(t) = \frac{|\gamma'(t) \times \gamma''(t)|}{|\gamma'(t)|^3} = \frac{ab}{(a^2\sin^2 t + b^2\cos^2 t)^{3/2}}.\]

Checkpoint
For the ellipse \(\gamma(t)=(a\cos t,\,b\sin t,\,0)\) in Example 1.10, the cross product \(\gamma'(t)\times\gamma''(t)\) turns out to be the constant vector \(ab\,\hat{k}\). What is the geometric significance of this being constant?
WhyA constant numerator \(ab\) does not imply constant curvature: the denominator \(|\gamma'|^3=(a^2\sin^2 t+b^2\cos^2 t)^{3/2}\) varies with \(t\), so \(\kappa(t)=ab/(a^2\sin^2 t+b^2\cos^2 t)^{3/2}\) is non-constant (unless \(a=b\)).
Exercise 1.6

Consider the graph of a smooth function \(y = f(x)\). Regarding the graph as a curve in \(\R^3\), it can be parametrized using \(x\) as the parameter by \(\gamma(x) = (x, f(x), 0)\). Show that the curvature of the graph is given by: \[\kappa(x) = \frac{|f''(x)|}{(1 + f'(x)^2)^{3/2}}.\]

Need help?
Exercise 1.7

For each of the following curves: (i) compute the curvature \(\kappa(t)\) using Proposition 1.8; (ii) If it is easy to find an explicit arc-length parametrization of the curve, compute also the curvature from the definition; (iii) find the \((x,y,z)\)-coordinates of the point(s) on the curve at which the curvature is the maximum.

  1. \(\gamma(t) = (3\cos t,\, 4\cos t,\, 5t)\).
  2. \(\gamma(t) = (t^2,\, 0,\, t)\).
  3. \(\gamma(t) = \left(2t,\, t^2,\, -\tfrac{1}{3}t^3\right)\).
Need help?