Chapter 2 › 2.5 Regular Hypersurfaces in Euclidean Spaces › 2.5 Regular Hypersurfaces in Euclidean Spaces
Section

2.5  Regular Hypersurfaces in Euclidean Spaces

Remark

This chapter can be skipped if readers are only interested in geometry of two-dimensional surfaces in \(\R^3\).

Checkpoint
This opening remark says Section 2.5 may be skipped by readers interested only in what?
WhyThe remark notes the section generalizes to higher dimensions and can be skipped by readers concerned only with 2-dimensional surfaces in \(\R^3\).

The prefix hyper- in the word “hypersurface” means the manifold is one dimension lower than the ambient space. A hypersurface in \(\R^{n+1}\) is an \(n\)-dimensional subset of \(\R^{n+1}\). As in the case of regular surfaces in \(\R^3\), we want to impose some conditions on a hypersurface so that it becomes regular in the way we desire.

Definition 2.28 (Regular Hypersurfaces in \(\R^{n+1}\))

Let \(\Sigma^n\) be a non-empty subset of \(\R^{n+1}\). Suppose \(\Sigma^n\) can be covered by the image of a family of local parametrizations \(\mathcal{A}=\{F_\alpha:U_\alpha\to\Sigma\}\), i.e. \(\Sigma=\bigcup_\alpha F_\alpha(U_\alpha)\), such that each \(U_\alpha\) is an open set in \(\R^n\) and each \(F_\alpha:U_\alpha\to\Sigma\) satisfies all three conditions below:

(1) \(F_\alpha(u^1_\alpha,\cdots,u^n_\alpha)\) is a \(C^\infty\) map from \(U_\alpha\) to \(\R^{n+1}\);

(2) \(F_\alpha\) is a homeomorphism between \(U_\alpha\) and its image \(O_\alpha:=F_\alpha(U_\alpha)\); and

(3) The vectors \(\big\{\pd{F_\alpha}{u^1_\alpha},\cdots,\pd{F_\alpha}{u^n_\alpha}\big\}\) in \(\R^{n+1}\) are linearly independent on \(U_\alpha\).

Then, we say that \(\Sigma^n\) is a regular hypersurface in \(\R^{n+1}\).

Checkpoint
Definition 2.28 generalizes Definition 2.1 to \(\R^{n+1}\). What replaces the cross-product condition (3) for charts \(F_\alpha:U_\alpha\subset\R^n\to\Sigma^n\)?
WhyIn higher dimensions the cross product is replaced by the requirement that the \(n\) partial-derivative vectors be linearly independent, so the chart's Jacobian has full rank \(n\) — the regularity condition for hypersurfaces.

Each vector \(\pd{F_\alpha}{u^i_\alpha}\big|_{(u^1_\alpha,\cdots,u^n_\alpha)}\) is a tangent to \(\Sigma^n\) at the based point \(p=F_\alpha(u^1_\alpha,\cdots,u^n_\alpha)\). With a slight abuse of notation and for simplicity, we will from now on denote \[\pd{F_\alpha}{u^i_\alpha}(p):=\pd{F_\alpha}{u^i_\alpha}\Big|_{(u^1_\alpha,\cdots,u^n_\alpha)}\] where \(p=F_\alpha(u^1_\alpha,\cdots,u^n_\alpha)\), to emphasize that \(p\) is the based point of the tangent vector.

By condition (3) in Definition 2.28, we know that the following vector space \[T_p\Sigma^n:=\Span\Big\{\pd{F_\alpha}{u^1_\alpha}(p),\cdots,\pd{F_\alpha}{u^n_\alpha}(p)\Big\}\] has dimension \(n\). This is called the tangent space at \(p\in\Sigma^n\).

Checkpoint
In Definition 2.28, condition (3) for a regular hypersurface \(\Sigma^n\subset\R^{n+1}\) requires that which collection of vectors be linearly independent on \(U_\alpha\)?
WhyCondition (3) asks the \(n\) tangent vectors \(\pd{F_\alpha}{u^1_\alpha},\cdots,\pd{F_\alpha}{u^n_\alpha}\) (the columns of the Jacobian \(DF_\alpha\)) to be linearly independent on \(U_\alpha\). This is exactly the higher-dimensional analogue of the \(\bF_u\times\bF_v\neq\mathbf 0\) condition for surfaces in \(\R^3\); the cross product is special to \(\R^3\) and is not available in general \(\R^{n+1}\). It guarantees \(\dim T_p\Sigma^n=n\).
Example 2.29

The graph \(\Sigma_f\) of any smooth function \(f:\R^n\to\R\) is a regular hypersurface in \(\R^{n+1}\). One can parametrize \(\Sigma_f\) by a single parametrization: \[F:\R^n\to\Sigma_f,\qquad (x_1,\cdots,x_n)\mapsto\big(x_1,\cdots,x_n,f(x_1,\cdots,x_n)\big).\] By straightforward computations, we have \[\pd{F}{x_i}=\hat e_i+\pd{f}{x_i}\,\hat e_{n+1}\] where \(\{\hat e_1,\cdots,\hat e_{n+1}\}\) are the standard basis vectors in \(\R^{n+1}\). It is clear that \(\big\{\pd{F}{x_i}\big\}_{i=1}^{n}\) are linearly independent. \(\square\)

Checkpoint
Example 2.29 shows any graph \(\Sigma_f\) of \(f:\R^n\to\R\) is a regular hypersurface, parametrized by a single chart. Why are the vectors \(\pd{F}{x_i}=\hat e_i+\pd{f}{x_i}\hat e_{n+1}\) automatically independent?
WhyThe first \(n\) coordinates of \(\pd{F}{x_i}\) are exactly \(\hat e_i\), so the \(n\) vectors have a triangular/identity block and are linearly independent regardless of \(f\). Thus the graph chart is regular.
Example 2.30

The \(n\)-dimensional unit sphere \[S^n:=\Big\{(x_1,\cdots,x_{n+1})\in\R^{n+1}:\textstyle\sum_{i=1}^{n+1}x_i^2=1\Big\}\] is a regular hypersurface in \(\R^{n+1}\). It can be parametrized by a pair of (inverse) stereographic projections \(F_+:\R^n\to S^n\setminus\{(0,\cdots,0,1)\}\) and \(F_-:\R^n\to S^n\setminus\{(0,\cdots,0,-1)\}\), with \(F_+\) given by \[F_+(u_1,\cdots,u_n)=\sum_{j=1}^{n}\frac{2u_j\,\hat e_j}{|u|^2+1}+\frac{|u|^2-1}{|u|^2+1}\,\hat e_{n+1}\] where \(|u|^2=u_1^2+\cdots+u_n^2\). We leave it as an exercise for readers to verify \(F_+\) satisfies the conditions in Definition 2.28 and write down the south-pole map \(F_-\). \(\square\)

Checkpoint
Example 2.30 parametrizes \(S^n\) by a pair of stereographic charts \(F_+,F_-\). Why are two charts (not one) needed?
Why\(F_+\) covers \(S^n\) minus the north pole and \(F_-\) covers \(S^n\) minus the south pole; their union is all of \(S^n\). This is the exact higher-dimensional analogue of Example 2.5.
Exercise 2.29

Fill in the omitted detail in Examples 2.29 and 2.30.

Need help?

Regular hypersurfaces are the higher-dimensional generalization of regular surfaces. As such many important results about regular surfaces can carry over naturally to regular hypersurfaces. We state the results below and leave the proofs as exercises.

Theorem 2.31 (c.f. Theorem 2.7)

Let \(g(x_1,\cdots,x_{n+1}):\R^{n+1}\to\R\) be a smooth function. Consider a non-empty level set \(g^{-1}(c)\) where \(c\) is a constant. If \(\grad g(p)\neq\mathbf 0\) at all points \(p\in g^{-1}(c)\), then the level set \(g^{-1}(c)\) is a regular hypersurface in \(\R^{n+1}\).

Checkpoint
Theorem 2.31 is the \(\R^{n+1}\) analogue of Theorem 2.7. Its hypothesis on \(g:\R^{n+1}\to\R\) is that \(\grad g(p)\neq\mathbf 0\) on \(g^{-1}(c)\), and its conclusion is:
WhyExactly mirroring Theorem 2.7, a non-vanishing gradient on the level set guarantees \(g^{-1}(c)\) is a regular hypersurface — the proof again invokes the Implicit Function Theorem in \(\R^{n+1}\).
Proposition 2.32 (c.f. Proposition 2.9)

Assume all given conditions stated in Theorem 2.31. Furthermore, suppose \(F\) is a bijective map from an open set \(U\subset\R^n\) to an open set \(O\subset\Sigma:=g^{-1}(c)\) which satisfies conditions (1) and (3) in Definition 2.28. Then, \(F\) satisfies condition (2) as well and hence is a smooth local parametrization of \(g^{-1}(c)\).

Checkpoint
Proposition 2.32 (c.f. Proposition 2.9) says that for a bijective \(F:U\to O\subset g^{-1}(c)\) satisfying conditions (1) and (3), condition (2) comes for free. What does this save you from verifying directly?
WhyJust like Proposition 2.9, this result hands you condition (2) automatically, so you never have to check continuity of \(F^{-1}\) by hand — the hardest part of confirming a chart — once (1) and (3) hold on a level set with non-vanishing gradient.
Proposition 2.33 (c.f. Proposition 2.12)

Let \(\Sigma\subset\R^{n+1}\) be a regular hypersurface, and \(F_\alpha:U_\alpha\to M\) and \(F_\beta:U_\beta\to M\) be two smooth local parametrizations of \(\Sigma\) with overlapping images, i.e. \(W:=F_\alpha(U_\alpha)\cap F_\beta(U_\beta)\neq\varnothing\). Then, the transition maps defined below are also smooth maps: \[(F_\beta^{-1}\circ F_\alpha):F_\alpha^{-1}(W)\to F_\beta^{-1}(W),\qquad (F_\alpha^{-1}\circ F_\beta):F_\beta^{-1}(W)\to F_\alpha^{-1}(W).\]

Checkpoint
Theorem 2.31 and Propositions 2.32–2.33 are stated as direct analogues of results from Sections 2.2–2.3. What is the essential reason these surface results “carry over naturally” to regular hypersurfaces, and what is the dimension of \(T_p\Sigma^n\)?
WhyDefinition 2.28 is the literal \(n\)-dimensional version of the regular-surface definition: \(C^\infty\), homeomorphism onto its image, and \(n\) linearly independent partial derivatives. Because the proofs in Sections 2.2–2.3 (level sets, the implicit/inverse function theorems, smooth transition maps) only use these structural facts and not the specific value \(n=2\), they generalize verbatim. Condition (3) then forces \(\dim T_p\Sigma^n=n\).
Exercise 2.30

Prove Theorem 2.31, Proposition 2.32, and Proposition 2.33.

Need help?